|
PPPshar
- Internet Connection Sharing (ICS) Software
Answers
to Frequently Answered Questions and replies to recent
support queries are listed below.
PPPshar Installation
Troubleshooting
Email
Connections
Networking - TCP/IP - DNS
Internet Software Configuration - Proxy Settings
Games & Chat
General
top
PPPshar Installation
| Error: "unable to start the application" |
PPPshar suddenly will not work saying
"unable to start the application - the class files could not be loaded"
SOLUTION:
Microsoft Java Virtual Machine runtime component is outdated.
Click here to Download
the latest Microsoft JVM and install. |
| PPPshar does not run or load. |
If you have problems in running the PPPshar program
then do the following.
Download MS-JVM by
clicking here. Install it in the computer where you want to run
PPPshar. Windows XP users should install this JVM or install the latest
service pack for Windows XP. The service pack contains the latest
JVM component required to run pppshar and also required to view java-enabled
webpages.
Note: 1) Internet Explorer 5.x or higher with the Microsoft Java Virtual
Machine component is required in the machine where pppshar is installed.
If you have Windows 98, Me, NT (with SPs) or Win 2000, then the JVM
required to run PPPshar is already present in your computer. Please
run the "Check System" program from the PPPshar program group to detect
the presence of this component in your system. If this "check system"
program does not report any errors, then your system has the correct
version of the JVM that is required to run PPPshar. But it is advisable
to update the JVM to the latest version. Download
MS-JVM by clicking here.You can easily add this JVM component
using the Internet Explorer setup wizard. Refer PPPshar Help for more
info.
2) If the JVM is the absent in your machine and you do not want to
install Internet Explorer, just download and install Microsoft Java
Virtual Machine in the gateway machine to use PPPshar. Download
MS-JVM by clicking here. |
Troubleshooting
| Password box - SOCKS authentication |
Problem : When browsing some sites using Internet
Explorer i get a password box that asks for a username and password
and says that it is required for Socks Authentication.
Firewall: 192.168.0.1
Realm: Netcache
User:
Password:
Solution: This can happen when accessing Java-enabled sites
and that your machine has Java component from Sun Microsystems. Download
and Install Java from Microsoft. You can Download
MS-Java from here |
| Broken images, webpages load partially |
Problem: Webpages in the browser in the client PC
are loading partially and with broken images.
Solution : This is an issue with the settings in the Internet Explorer
(IE) browser.
Go to Tools and then to Internet Options
Click on the Advanced tab
Scroll down to the option HTTP 1.1 Settings
"Use HTTP 1.1" (THIS CAN BE CHECKED)
"Use HTTP 1.1 through proxy connections" (THIS SHOULD BE UNchecked)
Restart the browser and try.
|
| PPPshar Error - "unable to start dns" |
PPPshar Error - "unable to start dns"
Windows DNS is conflicting with pppshar dns. That is why the error.
But this error will not prevent browsing from the client PC.
Solution:
Disable DHCP, ICS, DNS in Windows whichever is appropriate according
to the Windows version in the gateway pc. See below for detailed
instructions.
1) If you have Win98 SE, then remove the Internet Connection Sharing
(ICS) component.
Click Start, point to Settings, and then click Control Panel.
Double-click Add/Remove Programs, and then click the Windows Setup
tab.
Click Internet Tools, and then click Details.
Click to clear the ICS check box, and then click OK.
Restart the computer.
2) If you have WinMe, then remove the Internet Connection Sharing
(ICS) component.
Click Start, point to Settings, and then click Control Panel.
Double-click Add/Remove Programs, and then click the Windows Setup
tab.
Click Communications, and then click Details.
Click to clear the ICS check box, and then click OK.
Restart the computer.
3) To disable Internet Connection Sharing (ICS) in Windows 2000
You must be logged on as an administrator or a member of the Administrators
group in order to complete this procedure. If your computer is
connected to a network, network policy settings may also prevent
you from completing this procedure.
Open Network and Dial-up Connections by clicking Start, pointing
to Settings, and then clicking Network and Dial-up Connections.
Right-click the dial-up, virtual private network (VPN), or local
area connection on which you want to disable Internet Connection
Sharing, and then click Properties.
On the Sharing tab, clear the Enable Internet connection sharing
for this connection check box, and then click OK.
4) a) To disable ICS through the Desktop in Windows XP, you
must be the Administrator.
Right-click on My Computer and select Manage and then select Services
and Applications.
Select Services and then Internet Connection Sharing.
Double-click on Internet Connection Sharing and then on Startup
Type select Disable from the pull-down menu option.
Click on Apply.
4) b) To disable ICS through the Control Panel in Windows XP
Click the Start button and then double-click on Control Panel.
Click on Administrative Tools.
Click on Services.
Scroll down until you see Internet Connection Sharing located
under ICS Firewall.
Double click on Internet Connection Sharing and then on Startup
Type select Disable from the pull-down menu option.
Click on Apply.
|
| Windows XP - Error: Stop 0x000000D1
or DRIVER_IRQL_NOT_LESS_OR_EQUAL |
|
The Stop 0xD1 message indicates that the system attempted to access
pageable memory using a kernel process IRQL that was too high. Drivers
that have used improper addresses typically cause this error.
Stop 0xD1 messages can occur after installing faulty drivers or
system services. If a driver is listed by name, disable, remove,
or roll back that driver to confirm that this resolves the error.
If so, contact the manufacturer about a possible update. Using updated
software is especially important for backup programs, multimedia
applications, antivirus scanners, DVD playback, and CD mastering
tools. For more information about Stop 0xD1 messages, see the Microsoft
Knowledge Base.
|
Email
| PPPshar Settings for Mapped pop3 proxy |
If the following two scenarios are applicable to your
email accounts, then modify pppshar settings as mentioned below.
1) Some email servers will not accept the # character that you enter
in the username field to receive emails through PPPshar.
2) When you need to enter email account username as "username@yourmaildomain.com"
Solution:
Add a new tcp mapping service in PPPshar Pro. Here is how....
Go to PPPsharPro-->Settings
Disable #pop3 by changing enable=yes to enable=no
and Add the following to the settings file.
#mail
service=mail
map=tcp
host=EnterYourPop3ServerAddressHere
listen=110
remote=110
enable=yes
Save and restart pppshar. Then in the client pc email software just
enter your username as required by your email server or your ISP. |
| Eudora 5 |
In Eudora Version 5:
Click Tools
Click Options
Click Getting Started on the left panel
Enter a name for this account, typically you will use your name
Enter your return address
Enter the IP address of the pppshar PC (typically 192.168.0.1) in
the Mail Server Incoming
Enter your login name, followed by the # symbol, then the full pop3
server of the ISP (e.g.. user#pop3.server.com)
Enter the IP address of the pppshar pc (typically 192.168.0.1) in
the Mail Server Outgoing |
| Outlook |
Microsoft Outlook 2000
Click on Tools to open a drop down menu
Click on Account and click on the Mail tab
Click on Add and select Mail
Enter a Display Name
Click on Next
Enter your return e-mail address
Click on Next
Select POP3 mail server from the drop down box
In the Incoming and Outgoing mail servers enter the IP address of
the pppshar machine
Click Next
In the Pop Account Name field, enter your POP3 account in this pattern
- username#pop3server.com ( Replace pop3server.com with your actual
POP3 server like pop.ibm.net. Consult your ISP or refer gateway machine
settings to find out your pop3 host. (note the # sign. Do not use
@ sign ) Ex: username#server.ibm.net where server.ibm.net is your
pop3 server. )
Enter your password for that account
Click on Next, Enter a Friendly Name and Click Next
Click Connect using my LAN and click Next and Finish
|
| IMAP |
Add the following to PPPshar Pro Settings.
#imap
service=imap
map=tcp
host=Enter_Your_IMAP_Server_Here
listen=143
remote=143
enable=yes
Save and restart PPPshar. Then in your email software enter the IP
address of PPPshar computer as IMAP server.
|
| Secure Email |
This information applies only if your email account
setup requires Secure Sockets Layer (SSL) and only if the option "This
server requires a secure connection" is ticked in Outlook or Outlook
Express. If you are not sure of this option, consult your ISP.
Add the following for sending and receiving with appropriate smtp/pop3
host addresses
#send
service=send
map=tcp
host=
listen=465
remote=465
enable=yes
#receive
service=receive
map=tcp
host=
listen=995
remote=995
enable=yes
In the email software in the client PC, in Account name enter just
the username without special formating. |
| PPPshar Settings for SMTP - Sending
mail |
Go to PPPsharPro-->Settings and under #smtp section
type your
SMTP (outgoing mail server given by your ISP) in the host= line
Example:
#smtp
service=smtp
map=tcp
host=smtp.direcway.com
listen=25
remote=25
enable=yes
Restart pppshar if it is already loaded.
TO ADD ANOTHER SMTP SERVER ADDRESS
To add an another SMTP server go to #smtp2 section in pppshar settings.ini
file and change enable=no to enable=yes and enter second smtp server
address in host= line.
Example:
#smtp2
service=smtp2
map=tcp
host=smtp.yourdomain.com
listen=26
remote=25
enable=yes
Restart pppshar if it was running when you made these changes.
|
Connections
| Dialup for Out-bound, Satellite dish
for In-bound |
Query from Saudi Arabia:
"I have downloaded PPPShare and tested it on my Dail-up/Satellite
"One-Way"
Connection. Here are my findings:
My Satellite connection is a "One-Way" Connection. It uses a Normal
Dial-up (via Modem) for Out-Bound Traffic, and all In-Bound Traffic
comes through the satellite dish.
The satellite connection uses a special PCI Digital Receiver/NIC with
a
MAC Address. The IP for the Receiver/NIC is set to 10.10.10.10 with
subnet mask 255.255.255.0
The Dial-up Connection used with the satellite connection has the
HTTP
Proxy set to 127.0.0.1 Port: 9202, and SOCKS 127.0.0.1 Port: 9203.
No
other servers are setup.
PPPShare worked fine with HTTPS and FTP. However, it did NOT work
with
HTTP nor SOCKS. My guess is that it is due to the 127.0.0.1 (Loop
back
Connection).
Could you recommend a solution/solutions?"
SOLUTION:
Copy and paste the following into PPPshar Pro Settings file
(settings.ini) at the end of the file.
#oneway
service=oneway
map=tcp
host=127.0.0.1
listen=81
remote=9202
enable=yes
#oneway2
service=oneway2
map=tcp
host=127.0.0.1
listen=1080
remote=9203
enable=yes
Disable #http and #socks - change enable=yes to enable=no
Save and restart pppshar. Then verify the proxy settings in the
browser in the client pc. The http proxy address should point to
pppshar/gateway pc IP address and port 81 for http and 1080 for
socks.
|
| PPPshar settings - Direcway Satellite |
|
If you are connected to Internet through Direcway satellite connections,
then the browser in the gateway pc is likely to be configured for
a proxy. So make the following changes to PPPshar Pro Settings.
Copy and paste the following into PPPshar Pro Settings file (settings.ini)
at the end of the file.
#direcway
service=direcway
map=tcp
host=127.0.0.1
listen=81
remote=83
enable=yes
Save and restart pppshar. Then verify the proxy settings in the
browser in the client pc. The http proxy address should point to
pppshar/gateway pc IP address with port 81
|
| AOL Dial-up, DSL, Satellite |
You can share any type of Internet connection using
PPPshar Pro. So you can share AOL dialup, DSL or satellite (AOL plus)
connections.
Whatever be the type of AOL connection, you can comfortably share
your internet connection from the client pc using any browser (non-AOL).
You can also use any other Internet software from the client pc. No
modification is necessary in pppshar settings or in the AOL software.
But if you want to logon through the AOL software from the client
PC, then there are limitations if your ISP is AOL.
AOL allows only one connection per session, so your client computers
cannot logon to AOL when the main pc is connected to the same aol
account. We have feedback from PPPshar users that AOL 8 DSL supports
multiple logons and so it is possible to logon through AOL software
from the client pc. So try it. We can help you with any information
in this regard.
If your ISP is not AOL, then you can very much use any version of
AOL software from the client pc by configuring it for SOCKS proxy.
|
Networking - TCP/IP - DNS
| Windows XP client PC : DNS Configuration |
To add DNS server in Windows XP client computer, you
need to do the following:
Click "Start", click "Control Panel", click "Network and Internet
Connections", and then click "Network Connections".
Right-click the network connection (LAN in this case) that you want
to configure, and then click "Properties."
On the "General" tab (for a local area connection), or the "Networking
"tab (for all other connections), click "Internet Protocol (TCP/IP)",
and then click "Properties."
Click "Use the following DNS server addresses", and in "Preferred
DNS server" type the IP address of your gateway/pppshar machine.
|
| Windows 2000 client PC : DNS Configuration |
To add DNS server in Windows 2000 client computer,
you need to do the following:
Right click the "My Network Places" icon on the desktop to open the
pop up menu and choose "Properties" (or go to the control panel by
clicking Start in the lower left corner and double click the "Network
and dialup connections").
In the "Properties" dialog box you will see an icon labeled "Local
Area Connection". Right click this icon and select "Properties".
Double click the TCP/IP for that interface and you will see the IP
address of this client computer.
Choose "Use the following DNS Server address" radio button.
Enter the PPPshar computer IP address in the "Preferred DNS server
field". (192.168.0.1 - if you have followed our recommendations).
You will not need to enter an Alternate DNS server. The rest of the
configurations should be left default. |
Internet Software Configuration - Proxy Settings
| FTP Voyager |
Configuring FTP Voyager to work through PPPshar proxy.
1) Open FTP Voyager
2) From the Main menu, Go to View-->Options
3) Under Connection, go to Proxy
4) "Internet Access Type " should be "SOCKS 5"
5) Proxy name should be IP of gateway pc. Port should be 1080
6) Leave the proxy server userid/password fields blank
|
| Perl Package Download PPM |
Perl for Windows - To run Perl Package Manager
To download Perl modules and packages using PPM from the client PC,
do the following.
Type this in the DOS prompt.
SET HTTP_proxy=http://192.168.0.1
(case sensitive) use your gateway pc ip. Then run ppm.
|
| UD Agent - Distributed Computing |
|
Although the UD Agent automatically fills in the proxy settings
from Windows Internet Options, it does not use them by default.
Set the UD Agent to use the proxy settings.
Find the button on the Login panel, or if you are adding a proxy
once the UD Agent is running, open the UD Agents window by double
clicking on the icon in the system tray or from the icon in Windows
Explorer/the Start Menu.
Click on the button with a checkmark to open the proxy settings
window.
Click on the Proxy button on the login window, select your proxy
type from the drop-down menu, and enter the port number and the
proxy server address.
If using an "https" proxy, you do not need to enter "http" in the
"Proxy Server" box. Proxy server address is PPPshar pc IP address
and http port is 80, Secure (https) proxy port is 443, Socks port
is 1080
|
| Lynx |
Configuring the Lynx browser for proxy settings.
You will find this information useful when you have Unix/Linux in
the client computer and want it to access the web through pppshar
proxy.
Make the following changes to "lynx.cfg"
http_proxy:http://192.168.0.1:80/
ftp_proxy:http://192.168.0.1:8000/
socks_proxy:http://192.168.0.1:1080/
where 192.168.0.1 is the IP address of pppshar pc. socks_proxy is
optional.
|
| P2P File Sharing - Morpheus, Kazaa |
Configuring Morpheus or Kazaa or Grokster to work
through proxy.
Open Morpheus or Kazaa or Grokster
Go to Tools-->Options-->Firewall
Tick "Use SOCKS 5 proxy server"
in the "Host" type the pppshar pc ip address.
in "Port" type 1080
Uncheck the "Use SOCKS5 Authentication" checkbox.
|
| Norton LiveUpdate |
Open Norton Antivirus Program
Click the LiveUpdate icon
Then click on the "Configure" button
Select the "Proxy" tab
Enable the option "I want to customize the proxy settings for LiveUpdate"
You will then get the proxy options.
Under "HTTP proxy" tick the checkbox that says"Use proxy server for
http"
Type your pppshar/gateway machine IP address under "Address" field
and enter 80 in the port field. Click on the "Apply" and OK button
to save the settings.
|
| Realtick Trading Software |
Configuring RealTick software to go through PPPshar
proxy.
In the tal.ini file, you must add a line in the [PERMCACHE] section.
The line in the [PERMCACHE] section must name the IP address of the
PPPshar computer, and http proxy port, which is 80 (pppshar default
http port)
Add the following line to the [PERMCACHE] section of the tal.ini:
ProxyServer=192.168.0.1:80
Note: If you have problems with the above configuration, remove the
above setting in tal.ini and use Realtick through Sockscap. Sockscap
is a freeware application that will allow any software to access the
Internet as if it is directly connected to the Net.
See the topic "Sockscap for Games to work through proxy" in this support
page to download Sockscap. |
| Adobe GoLive |
To change the Use HTTP Proxy setting in GoLive:
1. Choose Edit > Preferences in GoLive.
2. Click the Network icon in the left pane of the Preferences dialog
box.
3. Select Use HTTP Proxy. Type PPPshar PC IP address in Host field
and 80 in Port field.
4. Click OK.
To change the Use FTP Proxy setting in GoLive:
1. Choose Edit > Preferences in GoLive.
2. Select the Network icon in the left pane of the Preferences dialog
box.
3. Select Use FTP Proxy. Type PPPshar PC IP address in Host field
and 8001 in Port field.
4. Click OK.
|
| Avantgo Mobile Software - Palm OS |
CONFIGURING MY AVANTGO FOR PROXY SERVERS
During installation, My AvantGo client software looks at how your
desktop browser is configured and configures itself the same way.
If your browser settings are incorrect, you want to connect to a different
proxy server, or My AvantGo is unable to find the information, you
may need to add these settings using one of two methods: with Autodetect
or manually.
Use Autodetect to configure your proxy settings if your desktop computer
accesses the Internet through a proxy server and if all servers you
access with My AvantGo are accessed through a proxy server.
Windows
To configure proxy server settings:
1) Click Start | Programs | AvantGo | AvantGo Connect.
The AvantGo Connect Control Panel appears.
2) Click the Connection tab.
3) Click Use Microsoft Internet Explorer proxy settings.
4) Click OK.
Note: The "Microsoft Internet Explorer proxy settings" option is available
if AvantGo Connect detects Microsoft Internet Explorer has proxy settings
configured. Use this option if you want AvantGo Connect to use the
same settings.
To configure proxy server settings using Autodetect:
1) Click Start | Programs | AvantGo | AvantGo Connect.
The AvantGo Connect Control Panel appears.
2) Click the Connection tab.
3) Click Autodetect now.
4) Click Done. Click Detect Again to retry.
5) Click OK.
Occasionally, no channels are received after a successful sync. It
may be that your browser proxy setting is incorrect or that AvantGo
Connect is unable to find the information. If this happens you will
have to configure the connection manually.
To configure proxy server settings manually:
1) Select Start | Programs | AvantGo | AvantGo Connect. The AvantGo
Connect Control Panel appears.
2) Click the Connection tab.
3) Click Use these proxy settings.
4) Click Change. The Advanced Connection Settings panel appears.
Fill in the HTTP, SOCKS & Secure proxy address with the pppshar pc
IP address and the appropriate port. pppshar default ports are - 80
for HTTP, 1080 for SOCKS and 443 for SECURE.
Macintosh
To configure a proxy server connection:
1) Click Apple Menu | Control Panels | AvantGo Connect.
2) Click Connection.
3) Click Change. The Edit Connection Settings dialog appears.
Fill in the appropriate proxy information as mentioned above.
|
| MusicMatch Jukebox Audio Software
- CDDB Proxy |
Follow the instructions below to configure connectivity
for CDDB CD lookup service in MusicMatch JukeBox Digital Audio Software.
Open MusicMatch software
Go to Options-->Settings-->CDDB Connectivity
Tick/check the option "Enable CDDB CD lookup service"
Under Connection
Tick/check the option "Enable Proxy" and enter the following in the
"Proxy Server" field.
socks=192.168.0.1 and in the Port field enter 1080
The IP address above refers to your gateway/pppshar pc ip address.
|
| Remote Desktop Assistance in Windows
XP. (RDP) |
Remote Desktop Assistance in Windows XP. (RDP)
Add the following to settings.ini file. This setting is for allowing
someone remotely to access your XP client pc for assistance. Make
sure you disable pppshar security settings (#useallow should be false)
Go to PPPsharPro-->Security
#rdp
service=rdp
map=tcp
host=EnterClientPCIPHere
listen=3389
remote=3399
enable=yes
Save and restart pppshar. Your XP client pc is now enabled for Remote
Assistance.
|
| WinAmp |
Perform the following steps to configure WinAmp for
operation behind a proxy:
Right-click somewhere in WinAmp to pull up the context menu, then
select "Options" and then "Preferences".
Or just hit Control-P.
At the top left of the Preferences window that pops up, click on "Setup".
Enter in your proxy info in the "HTTP Proxy" field. http proxy server
is pppshar pc ip and port is 80
Close the Preferences window. You may need to restart Winamp.
|
| Citrix from client machines - Accessing
Citrix Server through PPPshar proxy |
| Add the following to pppshar settings file to open
port.
#citrix
service=citrix
map=tcp
host=Enter_CitrixServerAddressHere
listen=1494
remote=1494
enable=yes
save and restart pppshar. Then in the Citrix client, just enter
pppshar pc ip and connect.
|
Games & Chat
| Yahoo Instant Messenger |
Configure Yahoo Messenger to use pppshar proxy
1) Open Yahoo Messenger
2) Click on Login and select Preferences
3) Click on the "Connection" tab and configure the proxy.
4) (Optional) Place a check mark in "Enable http proxy" and enter
pppshar pc ip address in Server name field and 80 in Server port.
5) Place a check mark in "Enable socks proxy" and enter pppshar pc
ip address in Server name field and port 1080 in Server port field.
6) Select Ver 4 or Ver 5
|
| ICQ |
ICQ through PPPshar proxy. Configuring Socks proxy
for the ICQ program
1) Open the ICQ Menu and select Preferences.
2) Choose Connections
3) Click on the Firewall tab. In some versions, you may need to go
to "Server" tab and set it to "Use Firewall" and "Use Proxy"
4) Select SOCKS 4 or SOCKS 5.
5) For the Proxy host type PPPshar pc IP address and for port 1080
6) Place a check mark in the "Use proxy to resolve hostnames" box
7) Click the Apply button
|
| YahooGames |
Here is how to make Yahoo Games work in the client
pc.
Add the following to pppshar settings.ini (Go to PPPsharPro-->Settings)
#yagames
service=yagames
map=tcp
host=yog1.games.scd.yahoo.com
listen=11999
remote=11999
enable=yes
Save and restart pppshar. If you have problems with the above game
server, try changing the game server address. The games hosts are
currently yog1.games.scd.yahoo.com,
yog2.games.scd.yahoo.com, ... up to yog55.games.scd.yahoo.com.
|
| Sockscap for Games to work through
proxy |
Most games may work through a program called Sockscap.
This application will allow any software to access the Internet as
if it is
directly connected to the Net.
Instead of opening a range of ports to access game server, use it
through Sockscap.
This is freeware and you can download it here and install it in the
client PC.
Configure this software for SOCKS 5 and use the game software or any
application through this sockscap software. Also refer PPPshar Pro
Help file under Games section.
Download Sockscap
|
| MSN Instant Messenger File Transfer |
If you use Internet connection sharing, you will not
be able to send files using MSN Messenger. You will be able to receive
them, but not send them.
Open settings.ini file - Go to PPPsharPro-->Settings and add the following
to the settings file.
#msnf
service=msnf
map=tcp
host=EnterClientPC_IP_Here
listen=6891
remote=6891
enable=yes
Replace the IP address to your correct client machine IP. Restart
pppshar if it was running when you made these changes.
|
General
| News - NNTP |
Enter the news server in pppshar settings file (in
#nntp) section. Go to PPPsharPro-->Settings.
#nntp
service=nntp
map=tcp
host=EnterNewsServerAddressHere
listen=119
remote=119
enable=yes
Save and restart pppshar, then in the client PC news software, enter
gateway pc ip
address as news server.
|
Back to main page
Contacting
Support
You can reach the PPPshar support via email
support@pppindia.com All support questions from registered users will
be responded to within 24 hours. Send your queries with an appropriate
Subject line.
Our Mailing Address:
PPP Infotech Limited
"PPP Enclave", 9/1 Manjolai
First Street, (near Kalaimagal nagar)
Ekkaduthangal, Chennai 600 097 Tamilnadu, India.
Phone : 91-44-22325243, 22327964 Telefax: 91-44-22325243.
Email: pppshar@pppindia.com Website : http://www.pppindia.com/intl/pppshar
PPPshar Home
| Connect
and Shar - Control modem and Internet connection from any computer. |
| Connect,
disconnect, monitor modem and Internet connection from any computer
on LAN. Works with any type of Internet connection. Alerts users in
the network in MSN-style pop-up animation, whenever Internet connection
in the gateway is Online or Offline. Useful to anyone sharing one
Internet connection using ICS or proxy server. Free
Download Click here |
| AnswerMyPhone
- Telephone answering software with Voicemail & caller ID.
|
Convert
your PC as a Digital Answering Machine for your telephone.
Free Download Click here |
| PPPshar
- Internet Connection Sharing Software. Share AOL, Direcway connection |
| Share
any type of Internet connection - standard dialup, AOL, DSL, DirecWay,
any 1-way or 2-way satellite or cable modem connection. Free
Download Internet Connection Sharing Click Here |
|
